Transparent car rear window LED display (TR2.5 / film series) with 60%+ optical transparency — ads on the glass without blocking the driver’s view.
Rear window LED display overview
A rear window LED display adds a second inventory surface behind the cabin: thin film or compact TR-series modules mount on glass so passengers and following traffic see daylight-visible creatives while the window stays usable. It complements roof-top media rather than replacing it.
Who buys rear window LED displays
- Taxi and ride-hail fleets adding glass inventory
- Vans and specialty vehicles with large rear glass
- Campaigns that need “in-lane” following-traffic impressions
Fit and install for transparent rear window LED
- Share window width × height (or a photo) for cut size confirmation.
- Controller and power usually sit in the trunk or under seating.
- Pair with roof media for dual inventory — start from taxi top LED display or custom vehicle LED display when the shape is non-standard.
Related guides
Why fleets choose this display
- 60%+ optical transparency for driver visibility
- Ultra-thin film mounts on glass
- Daylight-visible brightness
- Custom cut sizes for different vehicles
Product images
Selected photos from the consolidated catalog models.
Technical specifications
Key parameters for planning, RFQs, and installation.
| Parameter | Value |
|---|---|
| Model | TR2.5 (catalog) / transparent film series |
| Pixel Pitch | P2.5 mm (TR2.5) · P2.6×5.2 mm (film) |
| Resolution (TR2.5) | 192 × 48 |
| Transparency (film) | 60%+ |
| Brightness | 3,000–5,500 cd/m² (by config) |
| Housing / thickness | 540×30×150 mm (TR2.5) · ~2.8 mm film |
| Weight (TR2.5) | ~2 kg |
| Refresh Rate | ≥1,920 Hz |
| Power Input | DC 9–36 V / DC 12V |
| Connectivity | 4G LTE + WiFi |
Frequently asked questions
Answers buyers and fleet operators ask before ordering.
Will the film block the rear view?
No. The transparent LED film maintains 60%+ optical transparency so the rear window remains usable for visibility.
Can it be cut to my window size?
Yes. Panels can be custom-sized for taxi, bus, and specialty vehicle rear windows. Share width × height for a fit check.
Is it bright enough in daylight?
At about 3,000 cd/m² it is designed for daytime curb and traffic visibility. Night brightness can be auto-dimmed via CMS.
Where is the controller installed?
A compact controller and power module typically install in the trunk or under seating, with thin cabling to the glass film.
Which vehicles are supported?
Taxis, ride-hail cars, vans, and many bus rear windows. Send a window photo or dimensions for confirmation.
Inquire about this Rear Window LED Display
Fill in the form — your request goes to info@leddisplaydiy.com. We typically reply within 24 hours with configuration and pricing guidance.
Helpful to include:
- Vehicle type + rear window size (W×H) for the rear window LED display
- Quantity / fleet size
- City / climate (sun load)
- Need install training or CMS?
